Build Your Spray Granite System
Pick your system, a background colour, a granite blend and a topcoat, then enter your area. Each choice lands on the sample board as the next layer, and your kit list works out exactly what to buy.
- 3Topcoat
- 2Granite speckle
- 1Background colour
A digital guide built from photos of our ICE-series samples. Colours and speckle spread vary between screens and batches, so ask for a sample before you order.
-
1
Choose your system
What are you coating?
Are you covering stains, or worried about stains or tannin bleeding through?
-
2
Choose your background colour
RAL and Pantone colours are tinted at no extra cost on 5kg kits, so your tinted coats come as 5kg kits.
-
3
Choose your granite
Semi-cast: the granite blend is sprayed over your background colour, so each swatch shows the speckle on your colour.
-
4
Choose your topcoat
-
5
Enter your area
Measure every surface you'll coat and add them together.
What are you coating onto?
Porous surfaces soak up primer, so each primer kit covers about half the area and you need a second primer coat. Not sure? If a drop of water soaks in and darkens the surface, it's porous.