Build Your Spray Stone System
Pick your system, a background colour, a Spray Stone colour and a topcoat, then enter your area. Each choice lands on the sample board as the next layer, and your kit list works out exactly what to buy.
- 3Topcoat
- 2Spray Stone
- 1Background colour
A digital guide: the stone texture is simulated. Colours and texture vary between screens and batches, so ask for a sample before you order.
-
1
Choose your system
What are you coating?
Are you covering stains, or worried about stains or tannin bleeding through?
-
2
Choose your background colour
The base coat under your Spray Stone. It shows through the stone texture a little.
RAL and Pantone colours are tinted at no extra cost on 5kg kits, so your tinted coats come as 5kg kits.
-
3
Choose your Spray Stone colour
Spray Stone v2 is tinted to your colour: Black, White or any INFI colour. It goes on over your background colour as a light stone texture, and each swatch shows that texture.
-
4
Choose your topcoat
-
5
Enter your area
Measure every surface you'll coat and add them together.
What are you coating onto?
Porous surfaces soak up primer, so each primer kit covers about half the area and you need a second primer coat. Not sure? If a drop of water soaks in and darkens the surface, it's porous.