Build Your Decorative Pour System
Tell us what you're coating, pick a primer colour and the colours you'll pour, add a topcoat and finish if you want them, then enter your area. Each choice lands on the sample board, and your kit list works out the kits for every colour.
- 4Finish
- 3Clear topcoat
- 2Poured base coat
- 1Primer
A digital guide: every pour is different, so this shows the colours and their rough mix, not the exact pattern you'll get. Colours vary between screens and batches, so ask for a sample before you order.
-
1
What are you coating?
Is the surface porous?
Porous surfaces soak up primer, so you need twice the primer: a second coat before you pour. Not sure? If a drop of water soaks in and darkens the surface, it's porous.
-
2
Choose your primer colour
R.S.P Primer seals the surface and sets the background under your pour. Clear, black or white are the usual choices, or pick any POLY or RAL colour.
-
3
Choose your pour colours
R.S.P Poly Base Coat is tinted per colour, so you mix each colour as its own kit and pour them together. Every colour needs at least one full kit.
How many colours do you want?
RAL colours are tinted at no extra cost on 5kg kits, so RAL-tinted coats come as 5kg kits.
-
4
Add a clear topcoat?Optional
R.S.P Poly Topcoat is a clear polyaspartic coat over the pour: more depth, more protection and a high-gloss surface. Skip it if you're happy with the poured base on its own.
-
5
Choose a finishOptional
R.S Urethane Topcoat is one product in three finishes. Add it to set the sheen of the floor or top, or leave it out to keep the finish of the layer below.
-
6
Enter your area
Measure every surface you'll coat and add them together.