Build your Rox
resin bound system
Tell us where it's going, what it's going on and how big the area is. We'll work out every kit from the Rox installation guides, show you the build-up layer by layer, and put the whole system in your basket.
1
Where is it going?
Each one follows its own Rox installation guide.
2
What's it going on?
The surface under the resin bound decides the build-up.
2
What floor is it going on?
Tile and timber floors need movement mesh.
2
Which vertical method?
The Rox vertical guide gives three ways to do it.
3
What will it carry?
The depth sets how far each stone kit goes.
3
Domestic or commercial?
Both build-ups are fully permeable and SuDS compliant.
3
How deep?
Internal stone carpet is usually laid at 10–12mm.
3
How thick?
Pick the finished thickness.
4
How big is the area?
Measure the area to be covered, in square metres.
m²
or length m × width m
5
Options
Switch on what the job needs. Recommended items are already on.
ROX Concrete PrimerRecommendedSeals the surface and improves adhesion. 250–500 g/m² depending on porosity.
CRM 100kN MeshRecommendedReduces reflective cracking. Laid into the wet primer with 50–100mm overlaps.
Internal Floor Pore Filler / SealerRecommendedFills the pores and seals the floor. 0.8–1.0 kg/m² depending on how tightly the stone is compacted.
R.S Urethane Water-Based TopcoatOptional final sheen and extra wear resistance. 250 g/m².
ROX Rejuvenator / SealerOptional final coat that enhances colour and protects the surface. 250–500 g/m².
6
Pick a blend
37 blends. Each kit is 3 bags of 2–6mm stone and 1 fine bag.
Blend names:
Your build-up layer by layer
- Pick where it's going and the layers appear here, numbered in the order they go down.