Build Your R.S Urethane System
ArmourGuard is becoming R.S Urethane Water-Based: the same products under their new names. Tell us what you're coating, answer three quick questions, pick a colour and enter your area. Each choice lands on the sample board, and your kit list works out exactly what to buy.
- 3Clear topcoat
- 2Primer / base coat
- 1Blocking primer
A digital guide: the board shows your colour and finish on the kind of surface you picked. Colours vary between screens and batches, so ask for a sample before you order.
-
1
What are you coating?
Is the surface porous?
Porous surfaces soak up primer, so the primer gets a second coat. Not sure? If a drop of water soaks in and darkens the surface, it's porous.
-
2
Choose your primer
Are you covering stains or tannins, or do you need to build the primer up and sand it smooth, for the likes of MDF hairs and open grain?
-
3
Choose your colour
R.S Urethane Primer / Base Coat is tinted to your colour: the INFI range, or any RAL or Pantone colour.
RAL and Pantone colours are tinted at no extra cost on 5kg kits, so your tinted coats come as 5kg kits.
-
4
Clear coats and finish
Does it need clear coats on top, for added protection and polishing?
-
5
Enter your area
Measure every surface you'll coat and add them together.