Build Your X-Flow Screed System
Tell us what the floor is, choose your screed colour and sheen, and enter your area. The primer and mesh are worked out for you, each choice lands on the sample board, and your kit list shows exactly what to buy. The screed itself is P.HB Poly Screed, the product behind X-Flow.
- 4Sheen topcoat
- 3Screed
- 2Mesh
- 1Primer
A digital guide: the board shows your colour and sheen on a trowelled screed, with the build-up at the cut edge. Colours vary between screens and batches, so ask for a sample before you order.
-
1
What's the floor?
How porous is the concrete?
Porous concrete drinks the primer, so the kit list allows more R.S.P Primer the more porous it is.
-
2
Choose your screed colour
P.HB Poly Screed is pigmented to your colour: White, any POLY colour, or a RAL or Pantone match.
-
3
Change the sheen?Optional
Do you want to change the sheen of the screed?
R.S Urethane Topcoat is one clear product in three finishes. Choose its finish.
-
4
Enter your area
Measure the floor wall to wall and take off any fixed units. The screed is laid at 3 mm.