Universal hybrid epoxy primer
R.S.P Primer (3:1)
£31.50 – £120.00 ex VAT£37.80 – £144.00 inc VAT
R.S.P Primer is a premium two-part, 100% solids Universal Hybrid Epoxy Primer, developed by the Infinity Effects Materials Science Division. It is the mandatory first step for installing any R.S.P System, delivering exceptional adhesion, deep substrate penetration, sealing and long-term performance. Designed to be rolled, sprayed or poured, it bonds to a wide range of prepared surfaces and can also provide Moisture Vapour Barrier (MVB) performance on suitable concrete substrates.
Coming Soon
Coverage depends on the system and how porous the surface is: about 2.5 m² per kg for decorative pours, up to 7.5 m² per kg for countertops and floors. Work out your job →
- Formulated in Belfast
- Made in the U.K., Ireland & Spain
- Training available
- TDS download
How much will your project cost?
Enter your area and get a shopping list of the exact kits you need, at our retail prices.
Work out your cost- 3:1Mix ratio (A:B)
- 1 kg · 5 kgKit sizes
- Roll · Spray · PourApplication
- 100% solidsSolvent free
- 15 min – 4 hrsOvercoat window
- Inside & outInterior & exterior
Roll it. Spray it. Pour it.
Install it your way. The Infinity way.
Roll it
A thin, even coat with a non-shedding roller on countertops, boards, tiles and other non-porous surfaces.
Spray it
Spray onto suitable surfaces for fast, even coverage on larger areas.
Pour it
Pour and spread with a squeegee, then back-roll, to fully seal porous concrete, timber and boards.
Where It Sits in the System
Every R.S.P installation is built in layers. R.S.P Primer is step 2.
- Prepare the substrate.
- Apply R.S.P Primer.
- Apply R.S.P Poly Base Coat.
- Apply a compatible decorative component: flake, Spray Granite, Spray Stone, etc. Optional
- Apply R.S.P Poly Topcoat to protect the decorative layer.
- Apply R.S Urethane Water-Based Topcoat if you need a different sheen or extra protection. Optional
Bonds To
Correctly prepared surfaces, inside and out.
- Concrete
- Timber
- Plywood
- MDF
- Engineered boards
- Countertops
- Tiles
- Previously prepared surfaces
Why It Performs
Chemical intercoat bonding
Stays slightly tacky through its overcoat window, so the base coat bonds chemically as well as mechanically.
Moisture vapour barrier
On suitable prepared concrete it acts as an MVB, helping to manage residual moisture under the system.
Fast, adjustable curing
Fast curing as standard. Heat speeds it up; Infinity Effects Work Time Extender gives more working time.
Seals and penetrates
Wets out and seals the substrate, giving an even, sealed base for every coat above it.
Specs & Downloads
| Product type | Two-part hybrid epoxy primer |
|---|---|
| Mix ratio | 3:1 (Part A : Part B) |
| Hardener | IE-2 |
| Kit sizes | 1 kg (750 g A + 250 g B) · 5 kg (3.75 kg A + 1.25 kg B) |
| Mixing | Add all of Part B to Part A; mix 60–90 seconds with a low-speed drill and paddle |
| Resin density | 1.00 kg/L |
| Coverage | Depends on substrate porosity |
| Minimum overcoat time | 15 minutes (tacky) |
| Maximum overcoat window | 4 hours |
| Solvent content | 100% solids / solvent free |
| Standard colours | White, Mid Grey, Black |
| Shelf life | 6 months (unopened) |
| Storage | Cool, dry place in original unopened containers |









