Explore the Possibilities. Together.

Infinity Effects System · First stage

High-performance solvent blend · Degreases and creates a chemical surface key

Fusion Degreaser / Adhesion Promoter

£15.84 – £64.80 ex VAT£19.01 – £77.76 inc VAT

Fusion Degreaser / Adhesion Promoter is a professional-grade solvent-based surface preparation treatment engineered to both degrease and chemically prepare difficult, low surface-energy substrates for coating.

Designed as the first stage of the Infinity Effects coating system, it maximises adhesion, reduces the risk of coating delamination and promotes long-term coating durability across both residential and commercial applications.

Coming Soon

About 8–12 m² per litre, depending on surface texture and contamination. Always test on a small, inconspicuous area first. Work out your job →

  • Formulated in Belfast
  • Made in the U.K., Ireland & Spain
  • Training available
  • TDS download

How much will your project cost?

Enter your area and get a shopping list of the exact kits you need, at our retail prices.

Work out your cost
  • Spray & wipeNo rinsing required
  • 1 L · 5 LTin sizes
  • 8–12 m²Per litre
  • 2–5 minFlash off
  • 5–10 minReady to coat (20 °C)
  • Multi-surfaceMetals, plastics, tiles
Application

Spray it. Wipe it. Coat it.

Install it your way. The Infinity way.

01

Spray it

Shake well, then lightly spray Fusion directly onto the surface. Avoid excessive application.

02

Wipe it

Wipe straight away with a clean, lint-free microfibre cloth until all contaminants are removed.

03

Coat it

Let the solvent evaporate fully, then apply your Infinity Effects coating. No sanding normally needed.

The Infinity Effects System

Where It Sits in the System

Every Infinity Effects installation is built in layers. Fusion Adhesion Promoter / Degreaser is step 2.

4Infinity Effects finishSpray Granite, Spray Stone, decorative and topcoat systems
3Infinity Effects primer or base coatR.S Urethane Primer / Base Coat, R.S.P Primer or R.S.P Poly Base Coat
2Fusion Adhesion Promoter / DegreaserDegreases and creates a chemical surface keyThis product
1Hard-to-coat surfaceStructurally sound, loose and heavy contamination removed
  1. Make sure the surface is structurally sound, with loose and heavy contamination removed.
  2. Shake well, lightly spray Fusion onto the surface and wipe straight away with a clean microfibre cloth until all contaminants are removed.
  3. Let the solvent evaporate completely, about 5–10 minutes at 20 °C. The surface should look clean, dry and residue-free.
  4. Apply your recommended Infinity Effects primer, base coat or coating system.
Recommended for preparing

Works On

Hard-to-coat, low-energy and non-porous surfaces. For anything not listed, contact our Technical Support first.

  • Aluminium
  • Stainless steel
  • Mild steel & iron
  • Galvanised steel
  • Brass
  • Copper
  • ABS plastics
  • uPVC
  • PVC
  • Acrylic
  • Fibreglass
  • Vinyl
  • Ceramics
  • Porcelain
  • Glazed ceramic tiles
  • Porcelain tiles
  • Existing factory coatings
  • Powder-coated surfaces
  • Composite panels
Performance

Why It Performs

Cleans and keys in one step

Removes oils, grease, silicones and waxes while creating a microscopic chemical surface key.

Stronger, longer-lasting adhesion

Helps Infinity Effects coatings bond to difficult surfaces and reduces the risk of delamination.

Fast and simple

Spray, wipe and coat within minutes. No rinsing and normally no sanding.

Inside and out

A professional contractor formulation for residential and commercial work, internal and external.

Technical

Specs & Downloads

Product typeSolvent-based degreaser and adhesion promoter
AppearanceClear liquid
Base chemistrySpecialised solvent blend with adhesion-promoting additives
Solvent typeAromatic hydrocarbon blend
ViscositySimilar to xylene (approx. 0.6–0.8 cP at 25 °C)
Specific gravityApprox. 0.86–0.88
Flash pointApprox. 25–30 °C
Evaporation rateFast
VOC contentHigh
OdourAromatic solvent
Application methodSpray and wipe; ready to use, do not dilute
CoverageApprox. 8–12 m² per litre
Flash off (20 °C / 50% RH)2–5 minutes
Ready to coat (20 °C / 50% RH)5–10 minutes
Complete solvent evaporationApprox. 10 minutes
Compatible systemsR.S Urethane Primer / Base Coat, R.S.P Primer, R.S.P Poly Base Coat, Spray Granite, Spray Stone and decorative coating systems
LimitationsNot a standalone protective coating. Do not apply to wet surfaces
HazardsContains flammable solvents. Keep away from ignition sources and read the SDS before use
Shelf life24 months unopened
Storage5 °C to 30 °C in the original sealed container, cool, dry and well ventilated. Keep away from heat, sparks, naked flames and sunlight. Do not freeze
Full product details

Fusion Degreaser / Adhesion Promoter is a professional-grade solvent-based surface preparation treatment engineered to both degrease and chemically prepare difficult, low surface-energy substrates for coating.

Developed using a high-performance solvent blend combined with specialised adhesion-promoting technology, it removes grease, oils, silicones, waxes and surface contaminants while creating microscopic surface activation that significantly improves coating adhesion.

Unlike conventional degreasers that simply clean a surface, Fusion chemically conditions the substrate, creating an artificial surface key that lets Infinity Effects coating systems achieve exceptional bond strength on traditionally difficult-to-coat materials.

Designed as the first stage of the Infinity Effects coating system, it maximises adhesion, reduces the risk of coating delamination and promotes long-term coating durability across both residential and commercial applications.

Recommended for preparing

Aluminium, stainless steel, mild steel and iron, galvanised steel, brass, copper, ABS plastics, uPVC, PVC, acrylic, fibreglass, vinyl, ceramics, porcelain, glazed ceramic tiles, porcelain tiles, existing factory coatings, powder-coated surfaces and composite panels.

Recommended before applying

R.S Urethane Water-Based Primer / Base Coat, R.S.P Primer, R.S.P Poly Base Coat, Infinity Spray Granite systems, Infinity Spray Stone systems and Infinity decorative coating systems.

For substrates not listed above, please contact Infinity Effects Technical Support before application. Always test on a small, inconspicuous area first.

Shopping Basket