Spray performance & pot life enhancement additive
Polyaspartic Extender / Spray Assist
£67.50 ex VAT£81.00 inc VAT
Infinity Poly Extender / Spray Assist is a next-generation VOC-free, non-flammable solvent-replacement additive, developed by the Infinity Effects Materials Science Division for fast-curing polyaspartic and polyurea systems.
Engineered to improve atomisation, flow and levelling while reducing premature gelling and spray equipment clogging, it delivers smoother finishes and enhanced working characteristics across compatible Infinity Effects systems.
Recommended Addition Rates:
Polyurea Rapid Pigmented: up to 1–5% by weight
Diamond Coat: up to 1–5% by weight
R.S.P Primer: up to 1–5% by weight
R.S.P Poly Base Coat: up to 1–5% by weight
R.S.P Poly Topcoat: up to 1–5% by weight
SPRAY BETTER. FLOW BETTER. FINISH BETTER.
Coming Soon
Add up to 1–5% by weight to Part A of R.S.P Primer, Poly Base Coat or Poly Topcoat. Always carry out a small trial first.
- Formulated in Belfast
- Made in the U.K., Ireland & Spain
- Training available
- TDS download
How much will your project cost?
Enter your area and get a shopping list of the exact kits you need, at our retail prices.
Work out your cost- Up to 1–5%Added by weight to Part A
- 5 LPack size
- SprayHVLP, airless or pressure pot
- VOC freeNon-flammable
- LongerWorking time
- SmootherLess orange peel
Measure it. Mix it. Spray it.
Install it your way. The Infinity way.
Measure it
Weigh out up to 1–5% of the Part A weight. Adjust for temperature, humidity, hose length and film build.
Mix it
Add straight into Part A and mix until fully dispersed, then add Part B and mix as normal.
Spray it
Best with a 1.8–2.0 mm nozzle. Works with HVLP, air-assisted airless, airless and pressure pot systems.
Where It Sits in the System
Add up to 1–5% Extender / Spray Assist by weight to Part A of any R.S.P coat you spray.
- Prepare the substrate.
- Apply R.S.P Primer.
- Apply R.S.P Poly Base Coat.
- Apply a compatible decorative component: flake, Spray Granite, Spray Stone, etc. Optional
- Apply R.S.P Poly Topcoat to protect the decorative layer.
- Apply R.S Urethane Water-Based Topcoat if you need a different sheen or extra protection. Optional
Suitable For
Spray-applied R.S.P polyaspartic systems.
- Decorative flooring
- Industrial flooring
- Commercial flooring
- Garage floors
- Countertops
- Furniture
- Wall coatings
- Architectural features
- Protective coatings
Why It Performs
Improved atomisation
Lowers spray viscosity for a finer, more even spray pattern and a smoother coat.
Extended working time
Gently slows the initial cure for more spraying time, with a fast return to service.
Fewer blockages
Cuts tip drying, needle build-up, gun clogging and gelling inside hoses.
Superior finish
Better levelling, less orange peel, consistent gloss and an even film build.
Specs & Downloads
| Product type | Polyaspartic spray performance additive |
|---|---|
| Chemistry | Advanced solvent-replacement blend |
| Appearance | Clear liquid |
| VOC content | VOC free |
| Flammability | Non-flammable |
| Hazard classification | Non-hazardous when used as directed |
| Primary function | Spray performance and pot life enhancement |
| Addition rate | Up to 1–5% by weight, for all compatible systems |
| How to add | Into Part A, before adding Part B |
| Recommended nozzle | 1.8–2.0 mm |
| Compatible equipment | HVLP, air-assisted airless, airless, pressure pot and compressor-fed systems |
| Compatible systems | Infinity Effects polyaspartic systems |
| Pack size | 5 litre |
| Shelf life | 12 months unopened |
| Storage | 5 °C to 30 °C, cool and dry, away from direct sunlight and moisture |
Full product details
Infinity Poly Extender / Spray Assist
NEXT-GENERATION POLYASPARTIC & POLYUREA SPRAY PERFORMANCE ADDITIVE
Infinity Poly Extender / Spray Assist is a breakthrough next-generation solvent-replacement and performance additive engineered to improve the spraying, flow and working characteristics of fast-curing polyaspartic and polyurea coating systems.
Developed by the Infinity Effects Materials Science Division for professional applicators, Poly Extender / Spray Assist is designed to optimise atomisation, improve flow, extend working characteristics and reduce premature gelling or clogging during spray application.
Its advanced formulation allows installers to achieve a smoother, flatter and more consistent finish, particularly when working with highly reactive coating systems where conventional spraying can be challenging.
Spray Better. Flow Better. Finish Better.
Professional spray performance — the Infinity way.
Fast-reacting polyaspartic and polyurea coatings can begin curing extremely quickly once mixed, creating challenges with atomisation, spray pattern consistency, flow and equipment build-up.
Infinity Poly Extender / Spray Assist has been specifically engineered to modify these application characteristics, helping the coating remain more workable and spray-friendly while maintaining a professional finish.
The result is improved atomisation, enhanced film formation and a smoother, more uniform coating surface.
Advanced Solvent-Replacement Technology
Poly Extender / Spray Assist provides professional applicators with an alternative to conventional solvent-based thinning methods when working with compatible Infinity Effects systems.
Its specialised formulation is designed as a non-flammable, VOC-free and non-hazardous additive, providing enhanced application performance without relying on traditional flammable solvent thinners.
When used at the correct addition rate, it can help:
Improve Flow • Enhance Atomisation • Extend Working Characteristics • Reduce Spray Gelling • Minimise Equipment Clogging • Improve Levelling • Enhance Film Quality • Produce Smoother Finishes
Designed for Fast-Curing Resin Systems
Infinity Poly Extender / Spray Assist has been specifically developed for use with selected Infinity Effects polyaspartic, polyurea and R.S.P coating technologies.
It is particularly valuable when spraying high-reactivity coatings, where the speed of the chemical reaction can make achieving consistent atomisation and a smooth finish more demanding.
By modifying application characteristics and improving coating flow, Poly Extender / Spray Assist gives professional installers greater control during spray application.
Recommended Addition Rates
Addition rates vary depending on the Infinity Effects coating system being used and the required application characteristics.
Polyurea Rapid Pigmented — up to 1% to 5% by weight
Diamond Coat — up to 1% to 5% by weight
R.S.P Primer — up to 1% to 5% by weight
R.S.P Poly Base Coat — up to 1% to 5% by weight
R.S.P Poly Topcoat — up to 1% to 5% by weight
The exact addition rate should be selected according to application method, equipment, temperature, coating viscosity and required working characteristics.
Always begin at the lower recommended addition rate and adjust only where required in accordance with Infinity Effects technical guidance.
More Than Just a Spray Additive
Although specifically engineered to dramatically improve spray application, Poly Extender / Spray Assist can also modify the flow and working characteristics of compatible coatings when using alternative application methods.
Within suitable Infinity Effects systems, it can help installers achieve improved flow, levelling and working characteristics, providing greater control when application conditions require additional working time or reduced viscosity.
This makes it a versatile professional additive for contractors working with high-performance, fast-curing resin technologies.
Professional Spray Performance
Infinity Poly Extender / Spray Assist delivers:
• Next-generation solvent-replacement technology
• Engineered for fast-curing polyaspartic and polyurea systems
• Improves spray atomisation and pattern consistency
• Enhances coating flow and levelling
• Helps reduce premature gelling during spray application
• Helps minimise spray equipment clogging
• Improves film formation and surface quality
• Helps produce smoother, flatter finishes
• Extends working characteristics of compatible systems
• Non-flammable formulation
• VOC-free formulation
• Designed for professional application
• Compatible with selected Infinity Effects and R.S.P coating systems
Professional Product. Professional Support.
Infinity Poly Extender / Spray Assist is a specialised professional additive, and correct addition rates, spray equipment and application techniques are important to achieving optimum results.
Infinity Effects provides hands-on training and technical support to help professional applicators understand how to correctly incorporate Poly Extender / Spray Assist into compatible coating systems.
For project-specific recommendations, equipment guidance or application training, contact your Infinity Effects representative to discuss your requirements or schedule a training session.
SPRAY BETTER. FLOW BETTER. FINISH BETTER.
Advanced spray-control technology for the next generation of polyaspartic and polyurea coatings — the Infinity way.



