High-performance solvent blend · Degreases and creates a chemical surface key
Fusion Degreaser / Adhesion Promoter
£15.84 – £64.80 ex VAT£19.01 – £77.76 inc VAT
Fusion Degreaser / Adhesion Promoter is a professional-grade solvent-based surface preparation treatment engineered to both degrease and chemically prepare difficult, low surface-energy substrates for coating.
Designed as the first stage of the Infinity Effects coating system, it maximises adhesion, reduces the risk of coating delamination and promotes long-term coating durability across both residential and commercial applications.
Coming Soon
About 8–12 m² per litre, depending on surface texture and contamination. Always test on a small, inconspicuous area first. Work out your job →
- Formulated in Belfast
- Made in the U.K., Ireland & Spain
- Training available
- TDS download
How much will your project cost?
Enter your area and get a shopping list of the exact kits you need, at our retail prices.
Work out your cost- Spray & wipeNo rinsing required
- 1 L · 5 LTin sizes
- 8–12 m²Per litre
- 2–5 minFlash off
- 5–10 minReady to coat (20 °C)
- Multi-surfaceMetals, plastics, tiles
Spray it. Wipe it. Coat it.
Install it your way. The Infinity way.
Spray it
Shake well, then lightly spray Fusion directly onto the surface. Avoid excessive application.
Wipe it
Wipe straight away with a clean, lint-free microfibre cloth until all contaminants are removed.
Coat it
Let the solvent evaporate fully, then apply your Infinity Effects coating. No sanding normally needed.
Where It Sits in the System
Every Infinity Effects installation is built in layers. Fusion Adhesion Promoter / Degreaser is step 2.
- Make sure the surface is structurally sound, with loose and heavy contamination removed.
- Shake well, lightly spray Fusion onto the surface and wipe straight away with a clean microfibre cloth until all contaminants are removed.
- Let the solvent evaporate completely, about 5–10 minutes at 20 °C. The surface should look clean, dry and residue-free.
- Apply your recommended Infinity Effects primer, base coat or coating system.
Works On
Hard-to-coat, low-energy and non-porous surfaces. For anything not listed, contact our Technical Support first.
- Aluminium
- Stainless steel
- Mild steel & iron
- Galvanised steel
- Brass
- Copper
- ABS plastics
- uPVC
- PVC
- Acrylic
- Fibreglass
- Vinyl
- Ceramics
- Porcelain
- Glazed ceramic tiles
- Porcelain tiles
- Existing factory coatings
- Powder-coated surfaces
- Composite panels
Why It Performs
Cleans and keys in one step
Removes oils, grease, silicones and waxes while creating a microscopic chemical surface key.
Stronger, longer-lasting adhesion
Helps Infinity Effects coatings bond to difficult surfaces and reduces the risk of delamination.
Fast and simple
Spray, wipe and coat within minutes. No rinsing and normally no sanding.
Inside and out
A professional contractor formulation for residential and commercial work, internal and external.
Specs & Downloads
| Product type | Solvent-based degreaser and adhesion promoter |
|---|---|
| Appearance | Clear liquid |
| Base chemistry | Specialised solvent blend with adhesion-promoting additives |
| Solvent type | Aromatic hydrocarbon blend |
| Viscosity | Similar to xylene (approx. 0.6–0.8 cP at 25 °C) |
| Specific gravity | Approx. 0.86–0.88 |
| Flash point | Approx. 25–30 °C |
| Evaporation rate | Fast |
| VOC content | High |
| Odour | Aromatic solvent |
| Application method | Spray and wipe; ready to use, do not dilute |
| Coverage | Approx. 8–12 m² per litre |
| Flash off (20 °C / 50% RH) | 2–5 minutes |
| Ready to coat (20 °C / 50% RH) | 5–10 minutes |
| Complete solvent evaporation | Approx. 10 minutes |
| Compatible systems | R.S Urethane Primer / Base Coat, R.S.P Primer, R.S.P Poly Base Coat, Spray Granite, Spray Stone and decorative coating systems |
| Limitations | Not a standalone protective coating. Do not apply to wet surfaces |
| Hazards | Contains flammable solvents. Keep away from ignition sources and read the SDS before use |
| Shelf life | 24 months unopened |
| Storage | 5 °C to 30 °C in the original sealed container, cool, dry and well ventilated. Keep away from heat, sparks, naked flames and sunlight. Do not freeze |
Full product details
Fusion Degreaser / Adhesion Promoter is a professional-grade solvent-based surface preparation treatment engineered to both degrease and chemically prepare difficult, low surface-energy substrates for coating.
Developed using a high-performance solvent blend combined with specialised adhesion-promoting technology, it removes grease, oils, silicones, waxes and surface contaminants while creating microscopic surface activation that significantly improves coating adhesion.
Unlike conventional degreasers that simply clean a surface, Fusion chemically conditions the substrate, creating an artificial surface key that lets Infinity Effects coating systems achieve exceptional bond strength on traditionally difficult-to-coat materials.
Designed as the first stage of the Infinity Effects coating system, it maximises adhesion, reduces the risk of coating delamination and promotes long-term coating durability across both residential and commercial applications.
Recommended for preparing
Aluminium, stainless steel, mild steel and iron, galvanised steel, brass, copper, ABS plastics, uPVC, PVC, acrylic, fibreglass, vinyl, ceramics, porcelain, glazed ceramic tiles, porcelain tiles, existing factory coatings, powder-coated surfaces and composite panels.
Recommended before applying
R.S Urethane Water-Based Primer / Base Coat, R.S.P Primer, R.S.P Poly Base Coat, Infinity Spray Granite systems, Infinity Spray Stone systems and Infinity decorative coating systems.
For substrates not listed above, please contact Infinity Effects Technical Support before application. Always test on a small, inconspicuous area first.






