Water-based cure-control accelerator
R.S Urethane Catalyst
£37.50 ex VAT£45.00 inc VAT
R.S Urethane Water-Based Catalyst is a professional precision cure-control accelerator, developed by the Infinity Effects Materials Science Division specifically for the R.S Urethane Water-Based Coating System. Engineered to provide controlled acceleration of cure times while maintaining adhesion, durability and system performance, it is ideal for low-temperature applications, fast-track projects and rapid return-to-service installations. Add at 0.1–2% of the total kit weight, depending on the required increase in cure speed. Always add the catalyst directly to Part A and mix thoroughly until fully and evenly dispersed before adding Part B.
Add the catalyst directly to Part A of the R.S Urethane system.
Mix Part A thoroughly to ensure the catalyst is fully and evenly dispersed.
Coming Soon
Add 0.1–2% of the total mixed kit weight to Part A. Higher temperatures need less, colder conditions more. Never exceed 2% and always trial first.
- Formulated in Belfast
- Made in the U.K., Ireland & Spain
- Training available
- TDS download
How much will your project cost?
Enter your area and get a shopping list of the exact kits you need, at our retail prices.
Work out your cost- 0.1–2%Of total kit weight
- 1 LBottle
- Spray onlyHVLP or air-assisted
- FasterCure & return to service
- Cold weatherYear-round installs
- Low VOCWater-based system
Measure it. Mix it. Spray it.
Install it your way. The Infinity way.
Measure it
Work out 0.1–2% of the total mixed kit weight to suit the temperature and the cure speed you need.
Mix it
Add straight into Part A and mix with a mechanical mixer until fully dispersed, then add Part B and mix as normal.
Spray it
Spray straight away with HVLP or air-assisted equipment. Not for roller application.
Where It Sits in the System
Add 0.1–2% Catalyst by total kit weight to Part A of the R.S Urethane Blocking Primer, Primer / Base Coat or Topcoat you are spraying.
- Prepare the substrate: clean, degrease and key the surface.
- Where required, apply R.S Urethane High Build Blocking Primer to block stains and tannins. Sand it smooth where you need a flat finish, such as over raised MDF fibres and open grain. Optional
- Apply R.S Urethane Primer / Base Coat, the standard primer and colour coat for most applications, in as many coats as the job needs.
- Apply a compatible decorative component: flake, Spray Granite, Spray Stone, etc. Optional
- Apply R.S Urethane Topcoat where extra protection is required. Optional
Applications
With R.S Urethane Blocking Primer, Primer / Base Coat and Topcoat.
- Decorative concrete floors
- Industrial floors
- Commercial floors
- Garage floors
- Countertops
- Furniture
- Cabinetry
- Timber
- MDF
- Walls
- Architectural features
Why It Performs
Precision cure control
Adjust the dose to tailor working and curing times to the temperature and your schedule.
Cold-weather curing
Keeps jobs on track in low temperatures, so you can install all year round.
Faster return to service
Speeds up cross-linking to cut overall installation time on fast-track projects.
Performance kept
Adhesion, mechanical strength and chemical resistance are kept within the recommended dose.
Specs & Downloads
| Product type | One-part cure accelerator |
|---|---|
| Technology | Water-based cure-control additive |
| Appearance | Clear liquid |
| Compatible products | R.S Urethane High Build Blocking Primer, Primer / Base Coat and Topcoat |
| Recommended dosage | 0.1–2.0% of total mixed kit weight |
| Mixing stage | Into Part A, before adding Part B |
| Application method | Spray only: HVLP, air-assisted or conventional spray. Not for roller application |
| Once mixed | Use straight away; do not leave catalysed material standing |
| VOC content | Low VOC |
| Pack size | 1 litre bottle |
| Shelf life | 6 months unopened |
| Storage | Below 30 °C, cool, dry and frost-free |
Full product details
R.S Urethane Water-Based Catalyst
PROFESSIONAL CURE-CONTROL ACCELERATOR
R.S Urethane Water-Based Catalyst is a professional-grade cure-control accelerator developed specifically for the Infinity Effects R.S Urethane Water-Based Coating System.
Developed by the Infinity Effects Materials Science Division using advanced catalyst technology, it provides professional installers with greater control over coating cure speed, allowing selected R.S Urethane Water-Based coatings to be accelerated where site conditions or project schedules require a faster cure.
Engineered to provide controlled, predictable and repeatable acceleration, the catalyst allows installers to optimise curing performance while maintaining the adhesion, durability and professional finish expected from the R.S Urethane Water-Based System.
Professional Cure-Control Technology
Control the Cure. Accelerate the System. Keep the Performance.
R.S Urethane Water-Based Catalyst has been specifically engineered for use with:
R.S Urethane Water-Based Primer/Base Coat
R.S Urethane Water-Based Topcoat
When added at the appropriate dosage, the catalyst accelerates the coating’s chemical curing reaction, helping reduce cure times and allowing projects to progress more efficiently.
This gives professional installers greater control over application schedules without compromising the fundamental performance characteristics of the coating system when used correctly.
Designed for Challenging Site Conditions
Temperature and site conditions can have a significant effect on the curing speed of water-based coating systems.
R.S Urethane Water-Based Catalyst provides installers with an effective way to adjust curing performance to suit prevailing conditions, making it particularly useful for:
Cold-Weather Applications • Fast-Track Commercial Projects • Time-Sensitive Installations • Rapid Return-to-Service Projects • Controlled Cure Applications
Whether working in cooler conditions or managing a demanding commercial installation schedule, the catalyst provides an additional level of professional cure control and application flexibility.
Faster Cure. Same Professional Performance.
The purpose of R.S Urethane Water-Based Catalyst is simple: accelerate the cure without sacrificing the performance of the system.
When correctly dosed and used in accordance with the relevant product specification, it allows the R.S Urethane coating system to achieve a faster chemical cure while maintaining the adhesion, durability, clarity and protective characteristics expected from Infinity Effects coatings.
This makes it an invaluable addition for professional installers who need to balance application time, curing speed and project turnaround.
Predictable & Repeatable Results
R.S Urethane Water-Based Catalyst has been formulated to provide controlled and repeatable performance across a range of suitable application temperatures.
This allows experienced installers to tailor catalyst dosage according to temperature, site conditions, project requirements and desired cure speed.
Because environmental conditions can vary significantly between projects, the correct catalyst dosage should always be established before full application.
Trial Before Application
Always perform a small trial mix before commencing the main application.
The trial mix should be used to establish the appropriate catalyst dosage and resulting cure characteristics under the prevailing site temperature and environmental conditions.
Increasing catalyst levels may significantly affect working time and curing speed, so installers should ensure they are satisfied with the handling and cure characteristics before mixing larger quantities.
Always follow the relevant Infinity Effects Technical Data Sheet and application guidance for recommended catalyst addition rates.
Built for Professional Cure Control
R.S Urethane Water-Based Catalyst delivers:
• Professional-grade cure-control technology
• Accelerates R.S Urethane Water-Based coating cure times
• Designed for R.S Urethane Primer/Base Coat and Topcoat
• Ideal for cooler application conditions
• Supports faster project turnaround
• Helps achieve rapid return to service
• Controlled and predictable acceleration
• Adjustable to suit project and environmental conditions
• Designed to maintain system adhesion and durability
• Professional solution for fast-track installations
Take Control of the Cure
Every project is different. Temperature, application conditions and project schedules can all influence how quickly a coating needs to cure.
R.S Urethane Water-Based Catalyst gives professional installers the ability to take greater control of that process, accelerating the R.S Urethane Water-Based System when conditions demand it.
From cold-weather installations to fast-track commercial projects, it provides the additional cure control required to keep projects moving without sacrificing professional system performance.
CONTROL THE CURE. ACCELERATE THE SYSTEM. KEEP THE PERFORMANCE.
Professional cure-control technology — the Infinity way.



