Hybrid water-based urethane clear topcoat · Gloss, Satin or Matt
R.S Urethane Topcoat (Clear) (4:1)
£31.50 – £120.00 ex VAT£37.80 – £144.00 inc VAT
R.S Urethane Water-Based Topcoat is a premium two-part hybrid urethane clear coating, developed by the Infinity Effects Science Division for exceptional durability, abrasion resistance and long-term protection. Available in Gloss, Satin and Matt, its crystal-clear, extremely low-VOC formulation provides excellent adhesion, flexibility and UV stability across timber, concrete, PVC, metals, countertops, decorative coatings and many other prepared surfaces.
Coming Soon
About 15 m² per kg per coat: a 1 kg kit covers about 15 m², a 5 kg kit about 75 m². Coverage depends on how porous the surface is. Work out your job →
- Formulated in Belfast
- Made in the U.K., Ireland & Spain
- Training available
- TDS download
How much will your project cost?
Enter your area and get a shopping list of the exact kits you need, at our retail prices.
Work out your cost- 4:1Mix ratio by weight (A:B)
- 1 kg · 5 kgKit sizes
- 3 waysBrush, roll or airless spray
- 3 finishesGloss, Satin or Matt
- 30 minRecoat from (36 hr window)
- UV stableNon-yellowing · low VOC
Roll it. Spray it. Brush it.
Install it your way. The Infinity way.
Roll it
A thin, even coat for a continuous protective film. Avoid heavy film build for the best clarity.
Spray it
Airless spray for an ultra-even finish. Thin with DI water if needed, adding it to Part A before Part B.
Brush it
For edges, details and smaller pieces, laid off in a thin, even coat.
Where It Sits in the System
Every R.S Urethane installation is built in layers. R.S Urethane Topcoat is step 5.
- Prepare the substrate: clean, degrease and key the surface.
- Where required, apply R.S Urethane High Build Blocking Primer to block stains and tannins. Sand it smooth where you need a flat finish, such as over raised MDF fibres and open grain. Optional
- Apply R.S Urethane Primer / Base Coat, the standard primer and colour coat for most applications, in as many coats as the job needs.
- Apply a compatible decorative component: flake, Spray Granite, Spray Stone, etc. Optional
- Apply R.S Urethane Topcoat where extra protection is required. Optional
Common Applications
The finishing coat on the R.S Urethane system, or a clear protective sealer on its own.
- Decorative flooring systems
- Timber floors & furniture
- Countertops & worktops
- Concrete floors & walls
- Engineered boards & MDF
- Steel & aluminium
- PVC & composites
- Decorative paint systems
- Commercial & industrial coatings
- Residential interior & exterior
Why It Performs
Crystal clear, UV stable
Non-yellowing protection with excellent colour retention, so the colour underneath stays true.
Tough yet flexible
High abrasion and scratch resistance in a flexible film that stands up to everyday wear.
Chemical & stain resistant
Resists oils, stains and common household and industrial cleaners, and wipes clean easily.
Extremely low VOC
A water-based hybrid urethane: low odour and safer for installers and the environment.
Specs & Downloads
| Product type | Two-part hybrid water-based acrylic urethane clear topcoat |
|---|---|
| Mix ratio | 4:1 (Part A : Part B) by weight |
| Kit sizes | 1 kg (800 g + 200 g) · 5 kg (4 kg + 1 kg) |
| Hardener | R.S Urethane Hardener (Part B) |
| Colour | Crystal clear |
| Finish options | Gloss, Satin or Matt |
| Resin density | 1.10 kg/L |
| Mixing | Pour all of Part B into Part A and mix for 2–3 minutes with a slow-speed drill and paddle |
| Application | Brush, roller or airless spray |
| Minimum recoat time | 30 minutes, once touch dry |
| Maximum recoat window | 36 hours (lightly abrade after this) |
| Thinning | DI water only, if required |
| Coverage | About 15 m² per kg per coat |
| Shelf life | 6–12 months unopened |
| Storage | Cool, dry place, 5 °C to 30 °C, away from frost and direct sunlight |
| Use | Interior and exterior |
Full product details
R.S Urethane Water-Based Topcoat
R.S Urethane Water-Based Topcoat is a premium two-part hybrid water-based urethane clear coating engineered to provide exceptional durability, abrasion resistance and long-term surface protection across a wide range of residential, commercial and industrial applications.
Developed by the Infinity Effects Science Division using advanced acrylic emulsion and hybrid urethane technology, this next-generation topcoat combines the strength, durability and wear resistance of traditional two-component coatings with the environmental benefits of a modern, extremely low-VOC water-based formulation.
The result is a crystal-clear, highly durable protective finish that provides excellent resistance to everyday wear while maintaining the appearance and character of the surface beneath it.
Crystal-Clear Protective Performance
Designed as the protective finishing coat within the R.S Water-Based Coating System, R.S Urethane Water-Based Topcoat creates a tough, flexible and long-lasting protective barrier.
Available in Gloss, Satin and Matt finishes, it can be used either as a standalone clear protective coating over suitable prepared surfaces or in combination with R.S Urethane Water-Based Primer/Base Coat to create a complete high-performance coating system.
Exceptional Multi-Surface Versatility
R.S Urethane Water-Based Topcoat is suitable for use across a wide variety of correctly prepared substrates and decorative coatings, including:
Timber • Concrete • Engineered Boards • Countertops • PVC • Steel • Aluminium • Previously Coated Surfaces • Decorative Coatings • And More
Its combination of clarity, flexibility and durability makes it suitable for everything from furniture and countertops to residential, commercial and industrial surfaces.
Built for Professional Protection
Whether used as part of the complete R.S Coating System or as a standalone protective clear coat, R.S Urethane Water-Based Topcoat delivers:
• Crystal-clear protective finish
• Exceptional abrasion and wear resistance
• Excellent adhesion to correctly prepared surfaces
• Superior flexibility and durability
• UV-stable performance
• Excellent long-term clarity
• Extremely low-VOC water-based technology
• Internal and external application versatility
• Professional two-component performance
Gloss, Satin & Matt Finishes
Choose from Gloss, Satin or Matt to achieve the required appearance while maintaining the same high level of surface protection and professional performance.
From decorative finishes and furniture to demanding commercial and industrial applications, R.S Urethane Water-Based Topcoat provides the final protective layer designed to keep surfaces looking better and performing for longer.
Crystal-clear protection. Exceptional durability. Professional-grade performance. The finishing layer of the R.S Water-Based Coating System.










